Call back

Suntec TA 2 C 4010 7 Burner Pump

Suntec

Alternative Part Number

FBR 258011
ETB 252,000
  1. Burner Parts
  2. Burner pumps

Description

The high efficiency and increased reliability of the design allow the Suntec TA 2 C 4010 7 fuel pump to be used in the комплектации of large boiler complexes for heating factory workshops, production areas, and warehouses. The basic model is part of a series of devices equipped with a pressure regulating valve without a shut-off function.

Design and features

Thanks to the use of special materials and seals, the pump has a heat-resistant design, which allows it to pump fuel with a temperature reaching +150 degrees.

A hole of standard diameter 12 mm is drilled in the housing for mounting a heating element. A heater with a power of 80-100 W liquefies the fuel, reducing the load on the gear mechanism and extending the service life of the burner.

The location of the device is chosen to prevent contact with flammable materials and to ensure efficient heat transfer. The electric heater should be turned on in advance, before starting the pump.

Factory assembly allows the Suntec TA 2 C 4010 7 fuel pump to be installed in a system with a return line. If it is not available, the bypass plug should be removed and the opening blocked.

Manufacturer's recommendations

A coarse filter is not included in the комплектации, so it is recommended to install a separate 200 micron filter “upstream” to increase the operational life of the nozzles.

When pumping fuel oil, it is advisable to include a degassing bulb in the pipeline. This minimizes the negative impact of light fractions of heated fuel on the working elements and extends the service life of the pump.

Main parameters

  • Working fluid — diesel fuel, fuel oil, crude oil.
  • Fuel temperature in the pump: from 0 to +150 ºC.
  • Discharge pressure: from 7 to 40 bar, basic setting – 30 bar.
  • Operating viscosity: from 3 to 75 cSt.
  • Performance is 530 l/hour at a viscosity of 75 cSt and factory pressure setting.

Important advantages are:

  • high fuel delivery rate;
  • adjustable pressure over a wide range;
  • pumping of various types of fuel with a viscosity of 3-75 cSt;
  • flange connection according to the European standard EN 225;
  • increased reliability and heat resistance;
  • two- or one-pipe connection;
  • standard threaded ports and outlets.

Suntec equipment is suitable for most burners from well-known manufacturers. On the website you can buy the Suntec fuel pump TA 2 C 4010 7 along with additional accessories at an affordable price. You can find more detailed information about the characteristics and operating requirements of the product in the attached manufacturer's instructions.

Characteristics

Operating viscosity: from 3 to 75 mm²/sPerformance at 30 bar pressure and 75 cSt viscosity: 530 l/hPerformance at 30 bar pressure and 5 cSt viscosity: 400 l/hBy-pass plug: It is installed in the return line for a two-pipe system and is removed with a hexagonal wrench withVacuum gauge port: ¼ inchPressure gauge port: ¼ inchPump series: TA: Pressure controlReturn pressure: 5 barTorque: 0.3 N·mMaximum rotation speed: 3,600 rpmNominal rotation speed: 2,850 rpmDirection of rotation (looking at the drive shaft): C: counterclockwise rotation / nozzle on the leftValve function: pressure regulatingModel type: without electromagnetic valveOil temperature: from 0 to 150 °C in the pumpShaft design: one cavityFactory pressure setting: 30 barNozzle pressure range: from 7 to 40 barShaft diameter: 12 mmInlet pressure: 5 barSuction and return line: ½ inchNozzle outlet: ½ inchInstallation method: flange ⌀54 mmType of pumped liquid: sea ​​water, diesel

Installation locations